Often cleaning baths or water-based coolants require additional corrosion prevention performance. The AQUAPLUS, ISOADD and ISOTECT portfolio offers a range of special additives designed to achieve increased corrosion resistance. Some of the products can also be used stand-alone, for example in cooling water circuits or cooling and rust prevention of die-cast components.
Available Products: AQUAPLUS 22; DEWATER D3.
PETROFER’s water extendable ISOTECT OW products, when compared to mineral oil, and solvent based corrosion prevention products, pro- vide a high level of operational safety due to their water content. This function is especially desirable when applying rust preventives in areas such as foundries where fire risk should be minimized. They pro- vide excellent internal storage rust prevention.
Available Products: ISOTECT 300D.
ISOTECT WSD and OSD product types can rapidly dewater components, and offer a reliable rust prevention that is built following the evaporation of the solvent. Protection films are available in either an oily or slightly waxy type. The different solvent carrier flash points offer the possibility to select the dewatering fluid to suit the working environment. Dewatering fluids can be successfully used on components contaminated with water based cutting fluids or cleaners, and rapidly split off the water phase leaving an excellent preventive film.
Available Products: ISOTECT OSD 303; ISOTECT WSD 304.
The ISOTECT XS range of solvent based rust preventives form thin rust inhibiting films, with the consistency depending on the chemistry type. Following evaporation of the solvent carrier, the residual film normally appears much drier than with rust preventive oils. The evaporation speed correlates to the solvent flash point, while offering a reliable rust prevention. The fast drying, light, almost dry films can easily be removed by our industrial cleaners from the FEROCLEAN range.
Available Products: ISOTECT 60.
ISOTECT OM series rust preventive oils are used for intermediate storage of dry work pieces during and after production. Besides a rapid application speed, and a reliable corrosion resistance they offer further advantages being barium and VOC free (2010/75/EU). Typically, the oils can be easily removed with a product from our FEROCLEAN series.
Available Products: ISOTECT 390T, 730D.